In appearance the highly polished Brass Wolf
Note Eliminator looks like some sort of spherical type jewellery
for your bass. In form - it consists of two half-spheres that
simply screw together by means of a fine internal thread. On
the inside of one of the halves is a hole that contains the female
thread and a small - slightly protruding - 3.5mm (ave) diameter
post positioned right in its centre. On the inside of the other
half is the protruding male thread, a central hole to accept
the post from the other half and a U-shaped channel that bisects
the half - so as to accommodate the string.
Simply hold the half with the string slot
in it behind the string - obviously at the desired position -
then screw the other half onto it from the front of the string.
Yes - should take less than10 seconds to assemble.
Finding the optimum position for it - isn’t included in that time though!
When the two halves are tightened together
- the small internal post - clamps down firmly onto the string.
Yes. A rubber free design - means that there
is a negligible dampening effect on the string.
In comparison to other makes of eliminator
on the market - the brass wolf note eliminator does seem a tad
on the heavy side - however we boffins at The Contrabass Shoppe
have tested it pretty extensively and have to say that it completely
annihilates most wolfs.
You'll just fall in love with every aspect
of this product. Here are a few to salivate over;
i) It's a truly innovative product.
ii) It's design is superb.
iii) It's manufacture is of the highest quality.
iv) It's visually stunning
The product is a relative new comer to the market.
The Brass Wolf Note Adjuster is quick to install,
easy to adjust, looks just like jewellery on your bass and is highly
effective. If you need to tame the wolf in your instrument - simply
fit a Brass Wolf Note Eliminator. Problem solved.
Diameter: 23.0mm (average)
Depth when fully tightened: 16.0mm (average)
Total Weight: 30.0gms (average)